Ppp Pap Sent-Username - Avaya G450 Cli Reference Manual

CLI Commands

ppp pap sent-username

Use the ppp pap sent-username command to set the Password Authentication Protocol
(PAP) password for authentication with the remote peer.
Note:
This command is not backward-compatible. If you downgrade to version 3.x or
Note:
earlier, you need to reconfigure this command on the gateway.
Syntax
ppp pap sent-username username password password
no ppp pap sent-username
Parameters
Parameter
username
password
User Level
read-write
Context
interface:FastEthernet, Dialer (L2, L2-L3)
Example
To set the PAP password to avaya32 with password 123456:
G450-001(super-if:FastEthernet 10/2)# ppp pap sent-username avaya32 password
123456
Related Commands
encapsulation
delay, pppoe-client persistent
wait-for-ipcp
826 Avaya G450 CLI Reference
Description
The remote peer PAP username
The remote peer PAP password
pppoe, mtu, ppp chap
max-attempts,
hostname, ppp chap password,
pppoe-client service-name,
PPPoE (PPP over Ethernet)
Possible Default
Values Value
pppoe-client persistent
pppoe-client