Example
To enter the second-level subcontext for administering ISDN BRI for slot address v401:
G450-001(super-sls)# bri v401
G450-001(sls-bri 401)#
Sub-commands
The following commands are available once you are inside the
Additional SLS commands
clear
bri,
set
sls,
set bearer-capability
Use the set bearer-capability command to set the Information Transfer Rate field of the
Bearer Capability IE in SLS.
Note:
This command is only valid for a DS1 or BRI circuit employed with ISDN.
Note:
BRI sub-commands
set bearer-capability
set country-protocol
set directory-number-a
set directory-number-b
set endpoint-init
set interface
set interface-companding
set layer1-stable
set name
set side
set spid-a
set spid-b
set tei-assignment
show (bri)
show
bri,
show
sls,
sls
SLS survivability
sls
>
bri
context:
Issue 1 January 2008
925