Track - Avaya G450 Cli Reference Manual

CLI Commands
Field
State
Clients
Operational Status Last
Change
Registered Applications
Related Commands
rtr,

track

track
Use the track command to configure an object tracker. Use the no form of this command to
delete the object tracker.
You can configure two types of object trackers:
An object tracker which tracks the state of a single RTR object.
A track list which is composed of multiple previously-defined object trackers. Note that when
configuring a track list you may also specify how to calculate the state of the list based on the
states of the individual object trackers composing the list. If you do not specify how to calculate
the state of the list, the boolean AND argument is used.
Note:
You cannot delete an object tracker which is a member of a track list. You must
Note:
first remove the object tracker from the track list using the no object command.
You cannot delete an object tracker which was linked to an application using the
keepalive-track command. You must first use the no keepalive-track
command to disable the link.
Syntax
[no] track track-id rtr rtr-id
[no] track track-id
610 Avaya G450 CLI Reference
Description
The current operational state of the object tracker.
Possible options are
The number of applications registered to receive updates
from this object tracker
The time that elapsed since the object tracker last
changed its operational state
A list of the applications registered to receive updates
from this object tracker
list [{boolean {and | or} | threshold count}]
or
up down
Object tracking
2 of 2