Ip Distribution Access-List - Avaya G450 Cli Reference Manual

CLI Commands

ip distribution access-list

Use the ip distribution access-list command to create a RIP distribution access list
or add a distribution access rule to the list. Use the no form of this command to delete a
distribution access list rule. Apply the distribution rule using the distribution-list
command.
Syntax
ip distribution access-list access_list_number access_list_index
action {{router_ip [router_wildcard]}|any}
no ip distribution access-list access_list_number
[access_list_index]
Note:
If a list index is not given in the no ip distribution access-list
Note:
command, all rules are deleted.
Parameters
Parameter
access_list_number
access_list_index
action
router_ip
router_wildcard
any
User Level
read-write
Context
general
854 Avaya G450 CLI Reference
Description
The access list number
The access list index number
The action to perform
The IP router address of the network
The IP network wildcard address
Keyword that specifies the value can
be any IP address
RIP
Possible Default
Values Value
1-99
1–9999
permit,
deny