Traffic Shaping; Interface Serial - Avaya G450 Cli Reference Manual

CLI Commands
Example
To show the configured and allocated application memory:
G450-001(super)# show application-memory
Application
----------------------------------------
Sniffer (capture buffer-size)
TFTP (ip tftp-server file-system-size)
----------------------------------------
Total used memory
Total free memory
Total memory (fixed)
Related Commands
copy ftp phone-image,
phone-script, copy tftp
file-system size,

Traffic shaping

interface serial

Use the interface serial command to enter Serial interface or sub interface configuration
mode. If the specified interface or sub interface does not exist, the system creates it and enters
its configuration mode.
Use the no form of the command to delete the interface. The no form can only be used to delete
sub L3 and sub frame relay interfaces. The command fails for USP interfaces and when higher
or lower layers are defined for that interface.
Syntax
[no] interface Serial module/if_number [if_link_type]
For USP interfaces if_number has the syntax:
port[.ip_interface | {.sub_interface[.ip_interface]}]
For DS1 interfaces if_number has the syntax:
port:channel_group[.ip_interface | {.sub_interface[.ip_interface]}]
1142 Avaya G450 CLI Reference
copy ftp phone-script,
phone-image, copy tftp
show ip tftp-server files,
Memory(KB)
Allocated
---------------------
1024
18560
---------------------
19584
896
20480
copy running-config
phone-script, erase
show upload phone-script-file status
Traffic shaping
Configured
1024
18560
19584
896
startup-config, copy scp
phone-image, ip tftp-server