Set Interface-Companding - Avaya G450 Cli Reference Manual

set interface-companding

Use the set interface-companding command to set the interface to agree with the
companding method used by the far-end of the DS1 circuit for SLS mode.
Syntax
set interface-companding type
Parameters
Parameter
type
User Level
read-write
Context
sls > ds1
sls > bri
Example
To set the interface to agree with A-law companding for DS1:
G450-001 (sls-ds1-<port address>)# set interface-companding alaw
to set the interface to agree with A-law companding for BRI:
G450-001 (sls-bri-<port address>)# set interface-companding alaw
Related DS1 commands
clear ds1, set bearer-capability,
country-protocol,
signaling-mode,
Related BRI commands
bri, clear bri, set
directory-number-b,
spid-a, set spid-b,
Description
The interface to agree with the companding
method used by the far-end of the DS1 circuit:
alaw – A-law companding
●
ulaw – U-law companding
●
set bit-rate,
set interface, set long-timer,
set sls, show (ds1), show
bearer-capability, set
set endpoint-init, set
set sls, set tei-assignment,
set channel-numbering,
set name, set
ds1, show sls, sls
country-protocol, set directory-number-a,
interface, set layer1-stable,
show bri, show
SLS survivability
Possible
Values
alaw
ulaw
set connect, set
protocol-version, set side,
set
set name, set
(bri), show sls, sls
Issue 1 January 2008
Default
Value
ulaw
set
side, set
971