Show Ip Qos-List - Avaya G450 Cli Reference Manual

CLI Commands
Parameter
source_port
destination_
port
established
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), Loopback (L2, L2-L3), FastEthernet (L2-L3, L3, PPP L2,
PPP L2-L3, PPP L3), Tunnel (L2, L2-L3), VLAN (L2, L2-L3), Dialer (L2, L2-L3)
Example
To simulate the effects of applying access control list 330 to a packet entering the media
gateway through the FastEthernet interface, from IP address 192.67.85.12 to IP address
192.67.54.25:
G450-001(if:FastEthernet 10/2)# ip simulate 330 in 192.67.85.12 192.67.54.25
ip
Related Commands
ip access-control-list,
pre-classification,

show ip qos-list

Use the show ip qos-list command to display the attributes about a specific QoS list, or all
QoS lists, for the current interface.
Note:
To specify an interface name that includes spaces, enclose the entire name in
Note:
quotation marks (for example, "FastEthernet 10/2").
Syntax
show ip qos-list {list_number | all | active-list-in | active-list-out
| active-list-in-out} [detailed]
760 Avaya G450 CLI Reference
Description
The source port of the
simulated packet
The destination port of the
simulated packet
The value of the TCP
established bit
ip access-group, ip
show ip access-control-list,
Possible Values
1-65535
1-65535
policy-list-copy, ip qos-group,
show ip qos-list
Policy - QoS lists
Default Value
ip qos-list,