Avaya G450 Cli Reference Manual page 808

CLI Commands
Parameters
Parameter
module
port
User Level
read-only
Context
general
Example
To display port information for all ports:
G450-001(super)# show port
Port Name
------ ------- --------- ---- ----- ------ ---- ---- ----------------
10/5 NO NAME connected
1000BaseT Port
10/6 NO NAME connected
1000BaseT Port
Output fields
Name Description
Port Module and port number
Name Name of port
Status Status of the port — connected, faulty, disabled, no link
Vlan VLAN ID of the port
Level Priority level of the port — 0-7
Neg Auto-negotiation status of the port — enabled, disabled
Dup Duplex setting for the port — full, half
808 Avaya G450 CLI Reference
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
Status Vlan Level
3 0
3 0
Neg Dup. Spd. Type
enable full 100M G450 Media Gateway 10/100/
enable full 1G
Port status
Possible Default
Values Value
G450 Media Gateway 10/100/
1 of 2