Set Primary-Dchannel - Avaya G450 Cli Reference Manual

CLI Commands
Example
To specify that the D-channel is present:
G450-001(sls-sig-group 100)# set associated-signaling yes
Related Commands
add nfas-interface,
trunk-group-chan-select,

set primary-dchannel

Use the set primary-dchannel command to identify the D-channel number in SLS.
Syntax
set primary-dchannel circuit-number
Parameters
Parameter
circuit-number
User Level
read-write
Context
sls > sig-group
Example
To identify the D-channel number for gateway 005, slot v4 in a T1-ISDN line:
G450-001(sls-sig-group 100)# set primary-dchannel 005v424
Related Commands
add nfas-interface,
trunk-group-chan-select,
1016 Avaya G450 CLI Reference
clear sig-group, remove
show (sig-group),
Description
3-digit gateway number (for example, 005)
2-character slot number (for example, v4)
2-digit circuit number:
T1-ISDN: 24
●
E1-ISDN: 16
●
clear sig-group, remove
show (sig-group),
nfas-interface, set primary-dchannel,
show sig-group, show
nfas-interface, set associated-signaling,
show sig-group, show
SLS survivability
set sls,
sls, sig-group, sls
Possible
Values
set
sls, sig-group, sls
set
Default
Value
24
sls, set