Avaya G450 Cli Reference Manual page 380

CLI Commands
Parameter
port
off
on
proprietary
User Level
read-write
Context
general
Example
To specify that port 6/5 receives administrative status from a remote device:
G450-001# set port flowcontrol receive 6/5 on
Port 6/5 flow control receive administration status set to on
(port will require far end to send flowcontrol)
To specify that port 6/5 cannot send administrative status to a remote device:
G450-001# set port flowcontrol send 6/5 off
Port 6/5 flow control send administration status set to off
(port will send flowcontrol to far end)
Related Commands
set port auto-negotiation-flowcontrol-advertisement,
set port edge admin
negotiation, set port point-to-point admin
auto-negotiation-flowcontrol-advertisement,
380 Avaya G450 CLI Reference
Description
Number of the port on the module
Used with receive to turn off an attached
device's ability to send flow-control packets
to a local port. Used with send to turn off
the local port's ability to send administrative
status to a remote device.
Used with receive to specify that a local
port receives administrative status from a
remote device. Used with send to specify
that a local port sends administrative status
to a remote device.
Used with all to indicate that the local port
acts on and sends Avaya proprietary flow
control frames
state, set port enable |
status,
set port enable |
disable, set port level,
set port speed, show port
show port edge state,
Ethernet port configuration
Possible Default
Values Value
disable, set port duplex,
set port name, set port
show port flowcontrol