Show Rtp-Stat Config - Avaya G450 Cli Reference Manual

show rtp-stat config

Use the show rtp-stat config command to display the RTP statistics application
configuration.
Syntax
show rtp-stat config
User Level
read-only
Context
general
Example
To display the configuration of the RTP statistics application:
G450-001(super)# show rtp-stat config
RTP Statistic: Enabled
QoS Trap: Enabled
QoS Fault Trap: Enabled
Fault: 1
Clear: 0
QoS Trap Rate Limiter:
Token Interval: 10.00 seconds
Bucket Size: 5
Session Table:
Size: 128
Reserved: 64
Min Stat Win: 50
Note:
For an explanation of the output fields, see the table describing the output of the
Note:
show rtp-stat config command in the chapter Configuring monitoring
applications, in Administration for the Avaya G450 Media Gateway, 03-602055.
Related Commands
rtp-stat clear, rtp-stat
rtp-stat qos-trap-rate-limit, rtp-stat-service,
rtp-stat sessions,
event-threshold, rtp-stat
show rtp-stat summary,
fault, rtp-stat min-stat-win,
rtp-stat threshold, show rtp-stat
show rtp-stat thresholds,
RTP statistics
rtp-stat qos-trap,
detailed, show
show rtp-stat traceroute
Issue 1 January 2008 911