Show Mg List_Config - Avaya G450 Cli Reference Manual

Example
To display the current fault list:
G450-001(super)# show faults
CURRENTLY ACTIVE FAULTS
-------------------------------------------------------------------
-- Hardware Faults --
+ Multiple fans outage, 01/01-18:26:35.00
+ PSU fan brief outage, 01/01-18:26:35.00
-- MGP Faults --
+ No controller found, 01/01-00:00:01.00
Related Commands
set utilization cpu,
show restart-log,
show voltages,

show mg list_config

Use the show mg list_config command to show the installed media gateway equipment.
It displays the current hardware and firmware configurations of the media gateway.
The show mg list_config command is an alias for
Syntax
show mg list_config
User Level
read-only
Context
general
show mg list_config,
show download, show
test led
show mgc, show mm,
system, show temp, show
show module
Device status
show module, show recovery,
timeout, show utilization,
on page 264.
Issue 1 January 2008 261