Show Ip Access-Control-List - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
ip access-control-list,
pre-classification,

show ip access-control-list

Use the show ip access-control-list command to display the attributes of a specific
access control list on the current interface or all lists.
Syntax
show ip access-control-list {list_number | all | active-list-in |
active-list-out | active-list-in-out} [detailed]
Parameters
Parameter
list_
number
all
active-list-in
active-list-out
active-list-in-out
detailed
User Level
read-write
Context
general, interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3), VLAN (L2, L2-L3), Loopback (L2,
L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3)
714 Avaya G450 CLI Reference
ip access-group, ip
show ip access-control-list,
Description
The access control list to display
Keyword specifying to display attributes
for all access control lists
Keyword specifying to display lists for
the in direction
Keyword specifying to display lists for
the out direction
Keyword specifying to display lists for in
and out directions
Keyword specifying to display detailed
information
policy-list-copy, ip qos-group,
show ip qos-list
Policy - access control lists
ip qos-list,
Possible Default
Values Value