Add Port; Analog Trunks - Avaya G450 Cli Reference Manual

CLI Commands
Additional SLS commands
clear trunk-group,

add port

Use the add port command to administer the port appropriate for SLS. The port can belong to
one trunk group only, and the port assignment depends on the group-type parameter for the
trunk-group command.
Syntax
add port module port [sig-group]
Note:
The sig-group argument is only necessary for
Note:
Parameters
Parameter
module
port
sig-group

Analog trunks

G450: see
●
1036 Avaya G450 CLI Reference
set sls, show sls, show trunk-group sls
Description
The virtual integrated port
assignment for this group-type
Specifies the signaling group
associated with the management
of this trunk member
Table 114 (255 trunks per trunk group)
Digital trunks.
Possible Values
See either
Analog trunks
Digital trunks
Number between 1- 650
SLS survivability
Default
Value