Set Port Redundancy Enable|Disable - Avaya G450 Cli Reference Manual

set port redundancy enable|disable

Use the set port redundancy enable|disable command to globally enable or disable
port redundancy on the device. Using this command does not delete existing redundancy
entries.
Syntax
set port redundancy {enable|disable}
Parameters
Parameter
enable
disable
User Level
read-write
Context
general
Example
To globally enable port redundancy:
G450-001(super)# set port redundancy enable
All redundancy schemes are now enabled
Related Commands
set port redundancy,
Description
Keyword specifying to enable port
redundancy on the device
Keyword specifying to disable port
redundancy on the device
set port redundancy-intervals,
Possible
Values
show port redundancy
Issue 1 January 2008
Port redundancy
Default
Value
805