Set Sync Source - Avaya G450 Cli Reference Manual

CLI Commands
Parameter
mmID
portID
User Level
read-write
Context
general
Example
To specify that ports 1, 3, 5, 6, 7, and 8 of media module 2 are used for normal failover:
G450-001(super)# set sync interface primary v2 1,3,5-8
Related Commands
clear sync interface,

set sync source

Use the set sync source command to specify which clock source is the active clock source.
The identity of the current synchronization source is not stored in persistent storage.
Syntax
set sync source {primary | secondary | local}
Parameters
Parameter
primary
1122 Avaya G450 CLI Reference
Description
The Media Module ID number of a stratum
clock source, of the form "vn" where "n" is
the slot number
Port or port range for an ISDN clock source
candidate
set sync source, set sync
Description
Keyword specifying to set the primary clock
source to be active
switching, show sync timing
Synchronization
Possible Default
Values Value
Possible Default
Values Value