Show Interfaces - Avaya G450 Cli Reference Manual

show interfaces

Use the show interfaces command to display interface configuration and statistics for a
particular interface or all interfaces. The Frame Relay sub-interface only includes the following
counters:
packets & bytes in
●
packets & bytes out
●
input errors
●
output drops
●
Syntax
show interfaces [interface_type interface_identifier]
Parameters
Parameter
interface_type
interface_
identifier
User Level
read-write
Context
general
Description
The type of interface
The interface number.
The format varies
depending on the value
of interface_type:
For FastEthernet:
module/port
For Serial:
module/
port:channel-group
For Vlan:
Vlan id
For LoopBack:
Loopback number
For Tunnel:
Tunnel number
Possible Values
DIaler, FastEthernet, Serial,
Vlan, Loopback, Console,
Tunnel, USB
For FastEthernet: 10/2 or 10/4
For Serial(USP): 3/1, 4/1, 8/1
For Serial (DS1):
module/port: 3/1, 4/1, 8/1
channel-group:
E1: 0-30
T1: 0-23
For VLAN: 1-4090
For Loopback: 1-99
For Tunnel: 1-50
For Dialer: 1
Issue 1 January 2008
GRE tunneling
Default
Value
451