Show Ds-Mode - Avaya G450 Cli Reference Manual

CLI Commands
Context
general
Example
To display 1h-data statistics for the T1 controller on port 1 of module 4:
G450-001(super)# show controllers remote 5/1 1h-data
Related Commands
clear controller
source, ds-mode, fdl, framing,
loopback, remote,

show ds-mode

Use the show ds-mode command to display the current mode of the controller.
Syntax
show ds-mode
User Level
read-only
Context
general
Example
To display the current mode of the controller:
G450-001(super)# show ds-mode
Current ds-mode:
Configured ds-mode: T1
Related Commands
clear controller
source, ds-mode, fdl, framing,
loopback, remote,
374 Avaya G450 CLI Reference
counters, controller, cablelength
interface
show controllers, show ds-mode
T1
counters, controller, cablelength
interface
show controllers, show controllers remote
long, cablelength
serial, ip address, linecode
long, cablelength
serial, ip address, linecode
E1/T1 interfaces
short, channel-group,
(E1), linecode (T1),
short, channel-group,
(E1), linecode (T1),
clock
clock