Name
test-plug status
Address
bind to PMI
ID
Scheduler list
Ports:
Control
RTP-test
RTP-echo
Description
The registration status of the test plug. Possible values are:
test-plug is unregistered. The test plug is attempting to
●
register and is currently unregistered.
test-plug is unregistered (scheduler list exhausted). The
●
test plug has exhausted its scheduler list at least once, and is
now attempting to register.
test-plug is idle. The test plug is registered but not currently
●
running a test.
test-plug is running a test. The test plug is running a test.
●
test-plug is suspended. The test plug is suspended by its test
●
rate limiter.
test-plug configuration error (no IP address). No IP address
●
is configured for the test plug interface.
test-plug configuration error (bad IP address). The
●
configured test plug address is not configured for the test plug
interface.
test-plug configuration error (scheduler list empty). The
●
scheduler list is empty, and, therefore, the test plug is disabled.
test-plug control port binding error. The test plug cannot
●
bind the UDP control port.
test-plug RTP port binding error. The test plug cannot bind
●
the RTP test UDP port.
The IP address of the test plug interface
States that the PMI is the test plug's IP address
The MAC address of the G450, used to identify the test plug
The list of up to five IP addresses of schedulers with which the test
plug can attempt to register
The control port number. The UDP port on which the CNA test plug
listens for test requests from the current scheduler.
The UDP port from which the CNA test plug send RTP streams to
another test plug when running an RTP test
The RTP echo port number. The UDP port on which the CNA test plug
listens for RTP streams sent by other test plugs running RTP tests.
CNA test plugs
2 of 3
Issue 1 January 2008
223