Voip-Queue - Avaya G450 Cli Reference Manual

Related Commands - Priority queueing
priority-queue, queue-limit, voip-queue,
Related Commands - WFVQ
fair-queue-limit, fair-voip-queue, priority-queue,

voip-queue

Use the voip-queue command to select custom queueing for VoIP traffic. By default, VoIP
queueing is off, and Weighted Fair VoIP Queueing (WFVQ) is enabled on all Serial interfaces
and all FastEthernet interfaces for which traffic-shaping is enabled. If you disable custom
queueing by using the no form of the voip-queue command, WFVQ is re-enabled.
Syntax
[no] voip-queue
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured, Dialer (L2,
L2-L3)
Example
To enable VoIP queueing:
G450-001(if:Serial 3/1:1)# voip-queue
Related Commands - Priority queueing
priority-queue, queue-limit,
Related Commands - WFVQ
fair-queue-limit, fair-voip-queue, priority-queue,
voip-queue-delay
show
show queueing, voip-queue-delay
show
queue, voip-queue, voip-queue
queue, voip-queue
Issue 1 January 2008
Priority queueing
835