Show Rtp-Stat Detailed - Avaya G450 Cli Reference Manual

CLI Commands

show rtp-stat detailed

Use the show rtp-stat detailed command to display a detailed QoS log for a specific
RTP session.
Syntax
show rtp-stat detailed session-id
Parameters
Parameter
session-id
User Level
read-only
Context
general
Example
To display RTP statistics for RTP session 35:
G450-001(super)#
Session-ID: 35
Status: Active, QOS: Faulted, EngineId: 0
Start-Time: 2004-10-20,11:09:07, End-Time: -
Duration: 00:03:11
CName: gwp@135.8.118.252
Phone:
Local-Address: 135.8.118.252:2045 SSRC 154611212
Remote-Address: 135.8.76.107:2061 SSRC 2989801899 (0)
Samples: 38 (5 sec)
Codec:
G723 62B 30mS Off, Silence-suppression(Tx/Rx) Disabled/Not-Supported,
Play-Time
186.690sec, Loss 0.0% #1, Avg-Loss 0.1%, RTT 816mS #18, Avg-RTT 463mS,
JBuf-under/overruns 0.2%/0.0%, Jbuf-Delay 60mS, Max-Jbuf-Delay 60mS
Received-RTP:
Packets 6372, Loss 0.0% #0, Avg-Loss 0.0%, RTT 603mS #18, Avg-RTT 267mS, Jitter
0mS #0, Avg-Jitter 0mS, TTL(last/min/max) 63/63/63, Duplicates 0, Seq-Fall 0,
DS
912 Avaya G450 CLI Reference
Description
The index of a specific RTP session
show rtp-stat detailed 35
RTP statistics
Possible Default
Values Value