Copy Startup-Config Ftp - Avaya G450 Cli Reference Manual

copy startup-config ftp

Use the copy startup-config ftp command to upload the current configuration to a file
on an FTP server. The command prompts for the username and password. Uncommitted
changes to the configuration are not included.
Note:
After you change the configuration, run the copy running-config
Note:
startup-config command to save the changes. If you do not save the
changes, the device loses the changes when you reset it.
Syntax
copy startup-config ftp filename ip
Parameters
Parameter
filename
ip
User Level
read-write
Context
general
Example
To upload the current configuration to
G450-001(super)# copy startup-config ftp G450.cfg 135.64.10.33
Related Commands
copy ftp startup-config,
running-config
erase startup-config,
status, show logging file
Description
Name of file to create on the FTP server
IP address of the FTP server
copy running-config
tftp, copy startup-config
nvram initialize,
condition, show
on the FTP server at IP address 135.64.10.33:
G450.cfg
scp, copy running-config
scp, copy startup-config
show copy status, show download
running-config, show startup-config
Configuration files
Possible Default
Values Value
startup-config, copy
tftp, copy tftp startup-config,
status, show erase
Issue 1 January 2008 231