Avaya G450 Cli Reference Manual page 320

CLI Commands
Parameters
Parameter
raw
type
value
User Level
read-write
Context
dhcp pool vendor specific, dhcp pool option
Example
To specify IP addresses for World Wide Web servers (DHCP option 72):
G450-001(dhcp 5/option 72)# value raw ip-address "135.64.102.1, 135.64.102.2"
To enable IP forwarding (DHCP option 19 specifies whether the client should configure its IP
layer for packet forwarding):
G450-001(dhcp 5/option 19)# value raw hex 01
To set a non-encapsulated value in ASCII format for vendor-specific option 1:
G450-001(DHCP 5/vendor specific 1)# value raw ascii
"MCIPADD=10.10.2.140,MCPORT=1719,TFTPSRVR=10.10.5.188"
To set a non-encapsulated value in Hex format for vendor-specific option 1:
G450-001(DHCP 5/vendor specific 1)# value raw hex 00:00:11:22:33:44:55:66:77
Related Commands
bootfile, class-identifier, client-identifier, default-router, dns-server, domain-name, end-ip-addr,
lease, name, next-server, option, server-name,
vendor-specific-option
320 Avaya G450 CLI Reference
Description
Non-encapsulated value
Type of sub-option
The sub-option value
Possible Values
ascii — ASCII
hex string —
hexadecimal
ip-address — IP
address
word — 16 bit number
integer — 32 bit
number
show ip dhcp-pool, start-ip-addr, subnet-mask,
DHCP server
Default Value