Contact Closure; Set Contact-Closure Admin - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-only
Context
general
Example
To send test 50-byte packets to IP address 192.168.49.1 from IP address 192.168.49.4 every 3
seconds, timing out after 5 seconds:
G450-001(super)# ping 192.168.49.1 3 50 5 192.168.49.4

Contact closure

set contact-closure admin

Use the set contact-closure admin command to specify how the contact closure relay is
controlled.
Note:
The set contact-closure pulse-duration command does not affect the
Note:
set contact-closure admin manual command.
Syntax
set contact-closure admin module/port:relay
{mgc | manual-trigger | manual-off}
Parameters
Parameter
module
port
relay
mgc
244 Avaya G450 CLI Reference
Description
Module number of the contact closure port
Port number of the contact closure port
Contact closure relay
Contact closure is controlled by the call
controller
Contact closure
Possible Default
Values Value
10
2
1, 2