Set Lldp Tx-Interval - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
number
User Level
read-write
Context
general
Example
To set the TxHoldMultiplier to 4:
G450-001(super)# set lldp tx-hold-multiplier 4
Related Commands
set lldp re-init-delay,
set port lldp tlv,
config

set lldp tx-interval

Use the set lldp tx-interval command to configure the interval at which the device
transmits LLDP frames.
Syntax
set lldp tx-interval seconds
Parameters
Parameter
seconds
User Level
read-write
534 Avaya G450 CLI Reference
Description
The multiplier
set lldp system-control,
show lldp, show lldp config,
Description
The interval at which the device transmits LLDP
frames in seconds
set lldp tx-delay, set lldp
show port lldp config,
Possible Default
Values Value
2-10 30
tx-interval, set port
show port lldp vlan-name
Possible Default
Values Value
5-32768 30
LLDP
lldp,