Set Port Level - Avaya G450 Cli Reference Manual

set port level

Use the set port level command to set the priority level of a port or range of ports on the
switching bus. Packets traveling through a port set at normal priority are served only after
packets traveling through a port set at high priority are served.
Syntax
set port level module/port [value]
Parameters
Parameter
module
port
value
User Level
read-write
Context
general
Example
To set the priority level of port 6/5 to 5:
G450-001# set port level 6/5 5
Port 6/5 level set to 5
Related Commands
set port auto-negotiation-flowcontrol-advertisement,
set port edge admin
negotiation, set port point-to-point admin
auto-negotiation-flowcontrol-advertisement,
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
Priority level
state, set port enable |
status,
set port enable |
disable, set port flowcontrol,
set port speed, show port
show port edge state,
Ethernet port configuration
Possible Default
Values Value
0-7
disable, set port duplex,
set port name, set port
show port flowcontrol
Issue 1 January 2008 381