Speed (Ppp); Timeout Absolute - Avaya G450 Cli Reference Manual

CLI Commands

speed (PPP)

Use the speed command to set the PPP baud rate to be used by asynchronous PPP ports.
Note:
The peer baud rate must be set to the same value.
Note:
Syntax
speed speed_rate
Parameters
Parameter
speed_rate
User Level
read-write
Context
Interface: Console
Example
To set the PPP baud rate to 9600:
G450-001(if:CON)# speed 9600
Related Commands
async mode interactive,
(interface), shutdown (USB

timeout absolute

Use the timeout absolute command to set the number of minutes until the system
automatically disconnects an idle PPP incoming session.
Syntax
timeout absolute time
580 Avaya G450 CLI Reference
Description
The PPP baud rate
async mode terminal,
modem), timeout absolute
Modem configuration – Console port
ip address, ppp authentication,
Possible Default
Values Value
9600, 38400
19200,
38400
shutdown