Set Port Vlan - Avaya G450 Cli Reference Manual

set port vlan

Use the set port vlan command to set the port VLAN ID (PVID).
Note:
You need to define a VLAN before setting a port VLAN ID.
Note:
Syntax
set port vlan vlan_num module/port
Parameters
Parameter
vlan_num
module
port
User Level
read-write
Context
general
Example
To set the VLAN ID for port 10/3 to 1:
G450-001(super)# set port vlan 1 10/3
Port 10/3 added to VLAN 1
Related Commands
clear port static-vlan,
vlan-binding-mode,
trunk, show vlan
Description
Number identifying the VLAN
The module number
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
clear vlan, icc-vlan,
set trunk, set vlan, show cam
interface vlan, set port
vlan, show port
VLAN configuration
Possible Default
Values Value
static-vlan, set port
vlan-binding-mode, show
Issue 1 January 2008 1185