Show Rmon Alarm - Avaya G450 Cli Reference Manual

show rmon alarm

Use the show rmon alarm command to display information about existing alarm entries. If no
alarm index is specified, information for all alarms is displayed.
Syntax
show rmon alarm [alarm_index]
Parameters
Parameter
alarm_index
User Level
read-only
Context
general
Example
To show information for all existing RMON alarms:
G450-001(super)# show rmon alarm
alarm 1 is active, owned by billp
Monitors ifEntry.1.218106371 every 20 seconds
Taking delta samples, last value was 0
Rising threshold is 500, assigned to event # 1
Falling threshold is 100, assigned to event # 2
On startup enable rising or_falling alarms
Related Commands
clear rmon statistics,
history, show rmon statistics
Description
The alarm about which to display information
rmon alarm, rmon event, rmon history, show rmon
RMON monitoring
Possible Default
Values Value
event, show rmon
Issue 1 January 2008 875