CLI Commands
Parameters
Parameter
module
port
User Level
read-only
Context
general
Example
To display port-level LLDP configuration:
G450-001(super)# show port lldp config
Port
Port
Number Status
----
-------
10/3
txAndRx
10/6
txAndRx
Output fields
Field
Port Number
Port Status
Port
Description
542 Avaya G450 CLI Reference
Description
Number of module
Number of port(s)
Port
System
Description Name
----------- -------
disable
disable
disable
disable
Description
The ports on which LLDP is configured
The LLDP status of the port. Possible values:
disable – The LLDP agent neither transmits nor receives LLDP
●
frames on this port
tx-only – The LLDP agent transmits LLDP frames on this port
●
but does not store any information about the remote systems
connected
rx-only – The LLDP agent receives, but does not transmit,
●
LLDP frames on this port
rx-and-tx – The LLDP agent both transmits and receives LLDP
●
frames on this port (default)
Whether the Port Description TLV is transmitted (enable) or not
transmitted (disable) from the port
System
System
Description Capability Address
----------- ---------- ----------- ------
disable
disable
disable
disable
LLDP
Possible
Default
Values
Value
1-10
Management
PVID
disable
disable
disable
disable
1 of 2