Reset - Avaya G450 Cli Reference Manual

CLI Commands

reset

Use the reset command to reset a specified system resource. The command performs a hard
reset of the specified entity, returning any selectable parameters to their startup configuration
values and setting all hardware and firmware to a known state.
Note:
If the Supervisor modules are in Active/Standby configuration, resetting the active
Note:
supervisor causes the standby supervisor to take over and become active.
Note:
The reset command does not work while the configuration is being saved.
Note:
Note:
If a reset command is issued while a backup or restore operation is in progress, a
Note:
query displays, inquiring whether you wish to reset. If the gateway is reset while a
backup or restore operation is in progress, the backup/restore operation fails.
Syntax
reset [module module_number | voip | chassis]
Parameters
Parameter
module
module_number
voip
chassis
User Level
read-write
Context
general
Example
To reset the VoIP engine:
G450-001(super)# reset voip
This command will perform a hard reset.
Do you want to continue (Y/N)? y
210 Avaya G450 CLI Reference
Description
Keyword indicating to reset a module
The module to reset
Keyword indicating to reset the VoIP engine
Keyword indicating to reset the gateway and
all its media modules
CLI sessions
Possible Default
Values Value