Cablelength Long - Avaya G450 Cli Reference Manual

Context
general
Example
To enter configuration mode for a T1 controller on port 5/1:
G450-001(super)# controller t1 5/1
Related Commands
clear controller
ds-mode, fdl, framing,
remote, show controllers,

cablelength long

Use the cablelength long command to configure, transmit, and receive levels for a cable
longer than 655 feet. Use the no form of the command to restore the transmit and receive levels
to their default values.
Syntax
cablelength long rx_level tx_level
no cablelength long
Parameters
Parameter
rx_level
tx_level
User Level
read-write
Context
interface:Controller (T1)
Example
To set the receive and transmit values for the cable to gain36 and -7.5db:
G450-001(super-controller:5/1)# cablelength long gain36 -7.5db
counters, cablelength
interface serial,
show controllers
Description
The receive sensitivity
The transmit attenuation
long, cablelength short, channel-group,
ip address, linecode
remote, show ds-mode
Possible Values
gain26, gain36
-15db, -22.5db,
-7.5db, 0db
E1/T1 interfaces
clock
(E1), linecode (T1), loopback,
Default Value
gain26
0db
Issue 1 January 2008
source,
359