Set Mgc List - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
ip_address1
ip_address2
port
name
User Level
read-write
Context
general
Example
To set the server management sat port 3023 to have a controller IP address of 135.6.8.99 and a
management IP address of 135.34.54.2:
G450-001# set mediaserver 135.6.8.99 135.34.54.2 3023 sat
Related Commands
clear mgc list, session,
show mediaserver,

set mgc list

Use the set mgc list command to permit the creation of a list of valid Media Gateway
Controller(s). The user can configure up to four IP addresses separated by commas.
Note:
The set mgc list command appends the new controllers to the existing list of
Note:
controllers, if any.
Syntax
set mgc list {ipaddress1,...}
564 Avaya G450 CLI Reference
Description
Controller IP address used for registration
Management interface IP address
Service port number
Service type
set icc-monitoring,
show mgc, show mgc list
MGC (Media Gateway Controller) configuration
set mgc list, set reset-times,
Possible Default
Values Value
telnet, sat
show icc-monitoring,