Default-Metric (Rip); Distribution-List - Avaya G450 Cli Reference Manual

default-metric (RIP)

Use the default-metric command to set the default metric of redistributed routes for the
RIP protocol. Use the no form of this command to restore the default value.
Syntax
default-metric default_metric
no default-metric
Parameters
Parameter
default_
metric
User Level
read-write
Context
Router-RIP
Example
To set the default metric for redistributed routes to 5:
G450-001(router:rip)# default-metric 5
Related Commands
default-metric (RIP), distribution-list,

distribution-list

Use the distribution-list command to apply a distribution access list for incoming or
outgoing routing information in route updates. Use the no form of this command to deactivate
the list.
Syntax
[no] distribution-list access_list_number type [interface_type
interface_number|protocol]
Description
The interface RIP route metric value
network (RIP), redistribute (RIP),
Possible Default
Values Value
1-16 1
timers basic
Issue 1 January 2008
RIP
865