Set Digits - Avaya G450 Cli Reference Manual

set digits

Use the set digits command to define the inserted dial string that is added to the beginning
of the received DID incoming dial string for analog DID trunks or for DS1 TIE trunks using
in-band signaling in SLS.
Note:
You must have executed the
Note:
will work.
Syntax
set digits digits
Parameters
Parameter
digits
* The number of digits must agree with the digit-treat parameter in the
the digit-treat parameter is insert3, then the digits parameter for this command must be three
digits in length.
User Level
read-write
Context
sls > trunk-group
Example
To define the inserted dial string as 538:
G450-001 (sls-trunk-group-<tgnum>)# set digits 538
Related Commands
add port, clear
cbc-service-feature,
set digit-handling,
japan-disconnect,
supervision, set
trunk-group
Description
The inserted dial string that is added to the
start of the received DID incoming dial string
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set numbering-format,
tac, set trunk-hunt, set
set digit-treatment command before this command
remove port, set cbc,
set codeset-display,
set incoming-destination,
set send-name,
sls, show (trunk-group),
SLS survivability
Possible
*
Values
0-9 plus * and #
set digit-treatment
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
Issue 1 January 2008
Default
Value
command. If
set dial,
set
set
sls,
1049