Scheduler - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
cna-testplug
Example
To set the RTP test port to 65120:
G450-001(cna-testplug 1)# rtp-test-port 65120
Related Commands
clear counters (CNA test

scheduler,

show cna
scheduler
Use the scheduler command to add a scheduler's IP address to the list of schedulers with
which the test plug can attempt to register. You can list up to five schedulers. The test plug
attempts to register with the scheduler highest on the list, and moves along the list if necessary
until registration is successful.
You can specify the TCP registration port, the port used by the test plug to request registration
and send registration parameters to a scheduler. By default, the TCP registration port is 8888.
Use the no form of the command to clear one of the scheduler addresses.
Syntax
scheduler index scheduler-address[:port]
no scheduler index
Parameters
Parameter
index
scheduler-address
port
218 Avaya G450 CLI Reference
plugs), cna testplug, cna-testplug-service, control-port, rtp-echo-port,
testplug, shutdown (CNA test
Description
An index in the scheduler list.
Scheduler 1 is the first
scheduler attempted by the test
plug for registration.
The IP address of a scheduler
The TCP registration port
number
plugs), test-rate-limit
Possible
Values
1-5
1-65535
CNA test plugs
Default
Value
8888