Set Directory-Number-A - Avaya G450 Cli Reference Manual

CLI Commands
Related DS1 commands
clear ds1, set
set interface-companding,
signaling-mode,
Related BRI commands
bri, clear bri, set
endpoint-init, set
spid-a, set spid-b,

set directory-number-a

Use the set directory-number-a command to assign a directory number to the B1
channel of the BRI interface in SLS.
!
Important:
This number must be identical to the provisioned number that the network
Important:
provider has assigned to this circuit.
Note:
This command is valid only for a BRI circuit employed with ISDN.
Note:
Syntax
set directory-number-a number
Parameters
Parameter
number
User Level
read-write
Context
sls > bri
928 Avaya G450 CLI Reference
bearer-capability, set
set long-timer,
set sls, show (ds1),
bearer-capability, set
interface, set interface-companding,
set sls, set tei-assignment,
Description
String of 1-10 digits describing the directory
number to the B1 channel of the BRI interface
bit-rate, set channel-numbering,
set name, set protocol-version,
show ds1, show sls,
directory-number-a,
set
show bri, show
SLS survivability
set connect,
set side,
sls
set directory-number-b,
layer1-stable, set name,
(bri), show sls, sls
Possible
Values
0-9
set interface,
set
set
set side, set
Default
Value