CLI Commands
set port static-vlan
Use the set port static-vlan command to assign a static VLAN to a port.
Syntax
set port static-vlan module/port vlan_num
Parameters
Parameter
module
port
vlan_num
User Level
read-write
Context
general
Example
To bind ports 10/5 through 10/6 in the G450 to VLAN 2:
G450-001# set port static-vlan 10/5-6 2
VLAN 2 is bound to port 10/5
VLAN 2 is bound to port 10/6
Related Commands
clear port
static-vlan,
vlan-binding-mode,
trunk,
show vlan
1184 Avaya G450 CLI Reference
Description
The module number
The port or range of ports which are being
bound
VLAN to bind to the port
clear
vlan, icc-vlan,
set
trunk,
set
vlan,
show cam
interface
vlan,
set port
vlan,
show port
VLAN configuration
Possible
Default
Values
Value
vlan,
set port
vlan-binding-mode,
show