Description (Interface) - Avaya G450 Cli Reference Manual

Related Commands - IP interface configuration
description (interface),
serial, interface
broadcast-address, load-interval,
Related Commands - VLAN configuration
clear port static-vlan,
vlan-binding-mode,
trunk, show vlan

description (interface)

Use the description command to configure a description for the current interface. Use the
no form of this command to clear the description of the current interface.
Syntax
description string
no description
Parameters
Parameter
string
User Level
read-write
Context
Interface: Console, Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR L2, DS1 FR-SUB L2,
DS1 FR-SUB L2-L3, USP PPP L2, USP PPP L2-L3, USP FR L2), FastEthernet (L2, L2-L3,
PPP L2, PPP L2-L3), VLAN (L2, L2-L3), Loopback (L2, L2-L3), Tunnel (L2, L2-L3), Dialer (L2,
L2-L3), USB-modem
Example
To specify the VLAN 3 interface description as Marketing VLAN:
G450-001(if:Vlan 3)# description "Marketing VLAN"
interface console,
tunnel, interface USB-modem,
show ip interface brief
clear vlan, icc-vlan,
set trunk, set vlan,
Description
The description of the interface
interface fastethernet,
ip address, ip
set port static-vlan,
show cam vlan, show port
IP interface configuration
interface loopback,
admin-state, ip
set port vlan, set port
vlan-binding-mode,
Possible Default
Values Value
Issue 1 January 2008
interface
show
471