CLI Commands
Example
To select the network 192.168.169.0 as the network from which an address should be allocated
for BOOTP/DHCP requests:
G450-001(if:Vlan 1.20)# ip bootp-dhcp network 192.168.169.0
Related Commands
ip bootp-dhcp
ip bootp-dhcp relay
Use the ip bootp-dhcp relay command to enable relaying of BOOTP and DHCP requests
to the BOOTP/DHCP server. Use the no form of this command to disable relaying of BOOTP
and DHCP requests.
Syntax
[no] ip bootp-dhcp relay
User Level
read-write
Context
general
Example
To enable relaying of BOOTP and DHCP requests:
G450-001(super)# ip bootp-dhcp relay
Related Commands
ip bootp-dhcp
ip bootp-dhcp server
Use the ip bootp-dhcp server command to add a BOOTP/DHCP server to handle
BOOTP/DHCP requests received by this interface. A maximum of two servers can be added to
a single interface. Use the no form of this command to remove a server.
Syntax
[no] ip bootp-dhcp server ip_address
274 Avaya G450 CLI Reference
relay,
ip bootp-dhcp server
network,
ip bootp-dhcp server
DHCP and BOOTP relay