Set Delete-Digits - Avaya G450 Cli Reference Manual

CLI Commands
Example
To enter the subcontext for administering digit-treatment for incoming routed calls in SLS for
ISDN trunk group 99 with enbloc protocol:
G450-001(super-sls)# incoming-routing 99 enbloc
G450-001(super-sls-incoming-routing 99)#
Sub-commands
The following commands are available once you are inside the
Additional SLS commands
clear incoming-routing,

set delete-digits

Use the set delete-digits command to specify number of digits to be deleted from the
beginning of the dialed string for an inbound trunk call in SLS.
!
Important:
This command is required to complete the
Important:
which the mode is set to enbloc. The command is optional when the mode is set
to overlap.
Syntax
set delete-digits count
982 Avaya G450 CLI Reference
Incoming-routing sub-commands
set delete-digits
set insert-digits (dial-pattern)
set length
set match-pattern
show (incoming-routing)
set sls, show incoming-routing,
sls >incoming-routing
show sls, sls
incoming-routing administration in
SLS survivability
context: