Nvram Initialize - Avaya G450 Cli Reference Manual

User Level
read-write
Context
general
Related Commands
copy ftp startup-config,
startup-config,
startup-config tftp,
status, show erase

nvram initialize

Use the nvram initialize command to reset the NVRAM parameters to the factory default
values. This command is an alias for erase startup-config (refer to
startup-config on page 236).
!
CAUTION:
This command erases all announcement files in the G450 announcement
CAUTION:
directory.
Syntax
nvram initialize
User Level
read-write
Context
general
Example
To reset the configuration parameters for the device:
G450-001(super)# nvram initialize
This command will restore factory defaults, and can disconnect your telnet
session
*** Reset *** - do you want to continue (Y/N)? Y
Connection closed by foreign host.
copy running-config
copy running-config tftp,
copy tftp startup-config,
status, show logging file
ftp, copy running-config
copy startup-config ftp,
nvram initialize, show copy
condition, show running-config,
Configuration files
scp, copy running-config
copy startup-config scp,
status, show download
show startup-config
erase
Issue 1 January 2008
copy
237