Ppp Ipcp Dns Request; Show Ip Domain - Avaya G450 Cli Reference Manual

Related Commands
clear ip domain
domain retry, ip domain

ppp ipcp dns request

Use the ppp ipcp dns request command to enable requesting DNS information from the
remote peer during the PPP/IPCP session. Use the no form of this command to restore the
default value, which is not to request DNS information during the PPP/IPCP session.
Note:
The DNS Resolver uses the DNS servers discovered using this command.
Note:
Syntax
ppp ipcp dns request
no ppp ipcp dns
User Level
read-write
Context
Interface: Console, FastEthernet (PPP L2, PPP L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3,
USP PPP L2, USP PPP L2-L3) Dialer (L2, L2-L3), USB-modem
Example
To enable DNS information requests from the remote peer during the PPP/IPCP session:
G450-001(config-if:FastEthernet 10/2)# ppp ipcp dns request
Related Commands
ip address negotiated

show ip domain

Use the show ip domain command to display the DNS Resolver's configuration. The output
shows the DNS servers that were statically configured and those which were gathered using
DHCP or PPP protocols, as well as the list of domain suffixes.
Syntax
show ip domain
statistics, ip domain list,
timeout, show ip
ip domain lookup, ip domain
domain, show ip domain statistics
DNS resolver
name-server-list, ip
Issue 1 January 2008 347