Avaya G450 Cli Reference Manual page 910

CLI Commands
Parameter
codec-rtt
rtt
jitter
remote-jitter
milliseconds
echo-return-loss
db
all
User Level
read-write
Context
general
Example
To set the echo return loss threshold to 5 dB:
G450-001(super)# rtp-stat threshold echo-return-loss 5
Related Commands
rtp-stat clear, rtp-stat
rtp-stat qos-trap-rate-limit, rtp-stat-service,
rtp-stat sessions,
910 Avaya G450 CLI Reference
Description
Keyword specifying to set an estimation
of the overall Round Trip Time (RTT) on
the voice-channel, including the
network delay and internal delays.
Round Trip Time is the time taken for a
message to get to the remote peer and
back to the local receiver.
Keyword specifying to set the network
RTT. This metric does not include
internal delay. The device learns of the
RTT from RTCP messages.
Keyword specifying to set the variation
in delay of packet delivery to the local
peer
Keyword specifying to set the variation
in delay of packet delivery to the remote
peer. The device learns of the remote
jitter from RTCP messages.
Keyword specifying to set the echo
cancellation loss on the TDM bus
The db value
Keyword specifying to clear all
configured thresholds
event-threshold, rtp-stat
show rtp-stat summary,
fault, rtp-stat min-stat-win,
show rtp-stat config,
show rtp-stat thresholds,
RTP statistics
Possible
Values
0-5000
0-100
rtp-stat qos-trap,
show rtp-stat detailed,
show rtp-stat traceroute
Default
Value
show