Show Snmp User - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,

show snmp user

Use the show snmp user command to display configuration information for all SNMP users
or for a specified SNMP user.
Syntax
show snmp user [username]
Parameters
Parameter
username
User Level
admin
Context
general
Example
To display configuration information for SNMP user john:
G450-001(super)# show snmp user john
EngineId: 00:11:22:33:44
User Name: john
Authentication Protocol: md5
Privacy Protocol: des56
Group for Security Model v1:
Group for Security Model v2:
Group for Security Model v3:
Storage Type: volatile
Row status: active
1074 Avaya G450 CLI Reference
show snmp, snmp trap
snmp-server informs
Description
The username of the user whose
information you wish to display
auth, set snmp trap enable | disable
link-status, snmp-server enable
RestrictedGroup
RestrictedGroup
RestrictedGroup
SNMP access configuration
frame-relay,
notifications,
Possible Default
Values Value