Set Port Spantree Priority - Avaya G450 Cli Reference Manual

set port spantree priority

Use the set port spantree priority command to set the Spanning Tree priority level of
a port. This value defines the priority of a port to be blocked in case two ports with the same
cost cause a loop.
Syntax
set port spantree priority module/port value
Parameters
Parameter
module
port
value
User Level
read-write
Context
general
Example
To set the priority for port 6/5 to 128:
G450-001# set port spantree priority 6/5 128
port 6/5 spantree priority is 128
Related Commands
set port spantree,
spantree default-path-cost,
spantree hello-time,
spantree version,
Description
The module number
The port number
Number representing the priority of the
port. 0 is the highest priority. A port with a
lower priority will be blocked.
set port spantree cost,
set spantree enable |
set spantree max-age,
show spantree
set port spantree force-protocol-migration,
disable, set spantree
set spantree priority,
Spanning tree
Possible Default
Values Value
0-240 (in 128
multiples
of 16)
set
forward-delay, set
set spantree tx-hold-count,
Issue 1 January 2008
set
1103