Shutdown (Cna Test Plugs) - Avaya G450 Cli Reference Manual

User Level
read-write
Context
cna-testplug
Example
To add the scheduler whose IP address is 124.12.221.43 to the fourth place in the scheduler
list:
G450-001(cna-testplug 1)# scheduler 4 124.12.221.43
Related Commands
clear counters (CNA test
rtp-test-port, show cna

shutdown (CNA test plugs)

Use the shutdown command to disable the CNA test plug. Use the no form of the command to
enable the CNA test plug. By default, the test plug is enabled.
Syntax
[no] shutdown
User Level
read-write
Context
cna-testplug
Example
To enable the test plug:
G450-001(cna-testplug 1)# no shutdown
Related Commands
clear counters (CNA test
rtp-test-port, scheduler,
plugs), cna testplug, cna-testplug-service, control-port, rtp-echo-port,
testplug, shutdown (CNA test
plugs), cna testplug, cna-testplug-service, control-port, rtp-echo-port,
show cna testplug, test-rate-limit
plugs), test-rate-limit
Issue 1 January 2008
CNA test plugs
219