Spanning Tree; Set Port Edge Admin State - Avaya G450 Cli Reference Manual

CLI Commands

Spanning tree

set port edge admin state

Use the set port edge admin state command to assign or de-assign RSTP edge-port
admin state to a port for Rapid Spanning Tree Protocol (RSTP) treatment.
Syntax
set port edge admin state module/port admin_state
Parameters
Parameter
module
port
admin_state
User Level
read-write
Context
general
Example
To specify that port 6/5 is an edge port:
G450-001(super)# set port edge admin state 6/5 edge-port
Related Commands
set port auto-negotiation-flowcontrol-advertisement,
set port flowcontrol,
admin status, set port
edge state, show port flowcontrol
1098 Avaya G450 CLI Reference
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
The type of the specified port
set port level, set port
speed, show port auto-negotiation-flowcontrol-advertisement,
set port duplex,
name, set port negotiation,
Spanning tree
Possible Default
Values Value
edge-port,
non-edge-port
set port enable | disable,
set port point-to-point
show port