Example
To administer the trunk-access codes for trunk group 88:
G450-001 (sls-trunk-group-<200>)# set tac 88
Related Commands
add
port,
clear
cbc-service-feature,
set
digits,
set
digit-handling,
set
japan-disconnect,
supervision,
set
trunk-group
set trunk-hunt
Use the set trunk-hunt command to specify the trunk-hunting search within a facility in an
ISDN trunk group or through a non-ISDN digital trunk group in SLS.
Note:
This command only applies to DS1 trunks.
Note:
Syntax
set trunk-hunt type
Parameters
Parameter
type
tac,
clear
trunk-group,
set
channel-preference,
set
digit-treatment,
set
name,
set
numbering-format,
trunk-hunt,
set
sls,
show
Description
The trunk-hunting search type within a facility in
an ISDN trunk group, or through a non-ISDN
digital trunk group:
ascend – A linear search from the lowest
●
to the highest numbered available
channels
cyclical – A circular search beginning with
●
the point at which the search previously
ended. When the search has reached the
top of the channel list, it resumes at the
bottom of the list in wrap-around fashion.
descend – A linear search from the
●
highest to the lowest numbered available
channels
remove
port,
set
cbc,
set
codeset-display,
set
incoming-destination,
set
send-name,
(trunk-group),
show
SLS survivability
set
cbc-parameter,
set
set
codeset-national,
set
incoming-dialtone,
set
send-number,
sls,
show trunk-group
Possible
Values
ascend
cyclical
descend
Issue 1 January 2008
set
dial,
set
sls,
Default
Value
cyclical
1061