Avaya G450 Cli Reference Manual page 356

CLI Commands
Parameter Description
The community string for accessing
community
SNMP services
-name
The udp port of the SNMP host
port
The specific types of messages
notification
that the dynamic trap manager
-list
sends. Use this list to filter the
messages controlled by the
dynamic trap manager.
356 Avaya G450 CLI Reference
Possible Values
all — all traps
generic — generic traps
hardware — hardware faults
rmon — RMON rising/falling
alarm
dhcp server — DHCP server
error
dhcp-clients — DHCP client
error
rtp-stat-faults — RTP statistics:
QoS fault/clear traps
rtp-stat-qos — RTP statistics:
end-of-call QoS traps
wan — WAN router traps
media-gateway — media
gateway traps
security — security traps
config — configuration change
notifications
eth-port-faults — notifications of
Ethernet port faults
sw-redundancy — software
redundancy notifications
temperature — temperature
warning notifications
cam-change — notifications
about changes in CAM
l3-events — notifications about
L3 faults (duplicate IP, VLAN
violations)
lag-event — notifications about
link aggregation faults and
configuration changes
policy — notifications about
changes in policy (for L3 devices)
link-faults — link-down
notifications
supply — power supply
notifications
Dynamic trap manager
Default
Value
all